Trolling Motor Circuit Breaker

• PROLONG MOTOR LIFE: Protect your trolling motor from overload and electrical damage with Pro Controll’s trolling motor circuit breaker.
• COMPATIBLE USE: Works with all 12, 24, and 36 Volt systems; 60 AMP rating with manual reset button; Fully waterproof.
• SUPERIOR QUALITY: Expertly engineered and quality tested; Built with the needs of the Angler in mind.
• THE 60 AMP TROLLING MOTOR CIRCUIT BREAKER from Pro Controll is the fastest, most reliable way to protect your trolling motor from electrical damage.

This trolling motor circuit breaker protects your motor and wiring with resettable, waterproof over-current protection. Install the Pro Controll 60A Breaker near the battery on the positive lead to safeguard your entire power run. Works with 12V/24V/36V systems and pairs perfectly with our Battery Harness and Quick Connectors

• 60-amp manual-reset protection
• Waterproof housing; corrosion-resistant hardware
• 12V/24V/36V compatible; mount near battery on +
• Labeled BAT/LINE and AUX/LOAD terminals
• Compact footprint; ideal with 8-AWG harness

Frequently Asked Questions (FAQ)

Find quick answers about the 60A Breaker before you buy

Protect your trolling motor and wiring from overloads and short circuits. This marine-ready, manual-reset breaker mounts near the battery to provide reliable, resettable protection for most 12V/24V/36V setups.

1. ⚡ What does this breaker actually do?

This trolling motor circuit breaker automatically cuts power if the current exceeds 60 amps, protecting your trolling motor and wiring from overloads and shorts. Press the reset once you’ve addressed the cause.

2. 🔋 Which voltages is it compatible with (12V/24V/36V)?

It’s suitable for standard trolling-motor systems, including 12V, 24V, and 36V configurations.

3. ♻️ Is it resettable, or do I need to replace fuses?

It’s a manual-reset trolling motor circuit breaker—no fuses to replace. After a trip, investigate the cause (weed jam, wiring issue), then press the reset.

4. 🌊 Is it waterproof and marine-ready?

Yes. It’s designed for harsh marine environments. Mount above the waterline and follow standard marine wiring practices for best longevity.

5. ➕ Where should I install the breaker—near the motor or the battery?

Install it as close to the battery as possible on the positive (+) lead. That location protects the full length of the run to your motor.

6. 🧰 What wire size should I use with a 60A breaker?

Match the wire gauge to your motor’s current draw and cable length. Many 50–55 lb thrust setups use 8 AWG for typical runs, but always follow your motor manufacturer’s wiring table. Minn Kota’s wiring guide is a helpful reference..

7. 🧪 Is 60A the right rating for my motor?

For many small-boat motors, 60A is standard. Confirm your motor’s recommended breaker/fuse rating—if it differs, use the manufacturer’s spec.

8. 🔗 Can I use it with a battery harness or quick-connect system?

Absolutely. Install the trolling motor circuit breaker near the battery on the positive lead, then route to your Battery Harness or Quick Connectors and on to the motor.

9. 🧭 Does it have polarity or terminal orientation?

Yes. Observe the marked terminals: BAT/LINE (battery side) and AUX/LOAD (motor side). Maintaining orientation helps ensure performance and breaker life.

10. 🧼 Any maintenance tips?

Periodically check terminal tightness, look for corrosion, and rinse after salt exposure. Keep wiring supported and protected from abrasion.

11. ↩️ What’s the warranty and return policy?

Typical policy is a one‑year limited warranty with 30‑day returns (verify current terms on the product page).

12. 💵 What’s the price, and where can I buy it?

Available on rmioutdoorskc.com and major retailers (pricing can vary).

Find current pricing, stock, and install tips at rmioutdoorskc.com.