• RELIABLE PERFORMANCE: Pro Controll Quick Disconnect system is made of super durable, 8-Gauge waterproof tin-plated marine wire to last long.
• EASY REMOVAL: Leave the Quick Connect on the battery and unplug to remove your motor from the boat.
• SUPERIOR QUALITY: Expertly engineered and quality tested; Built with the needs of the Angler in mind.
• TOOL-FREE SET UP: Equipped with all the components needed for easy installation. Ideal for situations where a plug and socket are not available.

Frequently Asked Questions (FAQ)

Find quick answers about the Quick Connectors before you buy

Snap your trolling motor power on/off without opening the battery box. These marine-ready quick connectors use tinned copper conductors and sealed terminations to deliver a clean, reliable plug-and-play experience at the bow or anywhere you mount your motor.

1. 🔌 What are Pro Controll Quick Connectors, in plain English?

A heavy-duty, tool-free trolling motor quick connect that lets you connect and disconnect power instantly. Plug in at the bow and get fishing—no need to access the battery each time.

2. 📦 What’s included in the package?

Two quick-connect leads: a motor-side pigtail (butt-splice end) and a battery-side pigtail (ring-terminal end). Both are 8‑AWG tinned marine wire with sealed terminations.

3. 🔋 What voltages are supported (12V/24V)?

Designed for 12V and 24V trolling-motor systems commonly found on jon, utility, bass boats, pontoons, and kayaks.

4. 📏 How long are the connector leads?

Each trolling motor quick connect assembly is approximately 21 inches long, so you can mount the plug where it’s easy to reach without excessive slack.

5. 🧰 Why 8‑gauge wire—will it handle my motor?

8-AWG tinned copper balances ampacity and flexibility for short pigtail connections with typical trolling-motor currents. Size your main battery-to-bow run per your motor maker’s wire-gauge table—Minn Kota’s Endura series is a common reference—to minimize voltage drop..

6. 🛡️ Do I still need a circuit breaker? What size?

Yes. Protect the circuit with a trolling‑motor circuit breaker (typically 60A) mounted near the battery on the positive lead. Always follow your motor manufacturer’s specified breaker/fuse rating.

      7. 🧭 Where do I install the connectors?

Mount the trolling motor quick connect plug in a dry, accessible spot near the motor. Route the motor-side pigtail to your trolling-motor leads; route the battery-side pigtail to the battery (via breaker). Support the cable and confirm polarity (+/−) before power-up.

8. 🌊 Are they waterproof and corrosion‑resistant?

Yes. Built for marine use with tinned copper and sealed splices. Rinse after salt exposure and inspect/retighten periodically, like any marine electrical connection.

9. 🤝 Will these work with EZ Mount / EZ Mount II and the Battery Harness?

Absolutely. Use the Battery Harness to bring power forward, then terminate in a trolling motor quick connect. Your transom-mount motor (relocated to the bow via EZ Mount or EZ Mount II) can plug in/out in seconds.

10. 🧾 What are the model and UPC?

Model: RMI8GAQC. UPC: 738281000227—valid for reorders or searching retailers.

11. ↩️ What’s the warranty and return policy?

Typical policies include a one‑year limited warranty and a 30‑day return policy. Check the current product page for up‑to‑date terms.

12. 💵 How much do they cost, and where can I buy them?

Available at rmioutdoorskc.com and major retailers; pricing can vary by retailer and promotions.